Home Elevators for Builders, Contractors and Architects in the Treasure Valley
Elevated Mobility Solutions works with builders, remodelers and architects across Boise and the Treasure Valley to plan and install residential elevators in new custom homes and major remodels. The earlier we see the plans, the easier it is to get the shaft, pit, electrical and schedule right the first time, and the fewer surprises your client sees at the end.
Have a project on the boards? Call (208) 329-5006 or send us the project details.
Why bring the elevator company in early
- The elevator decides the structure. The model and cab size set the hoistway dimensions, pit depth, overhead clearance and where any machine or pump goes.
- Late changes are expensive. Reframing a shaft, re-pouring for a pit or rerouting ducts after rough-in costs time and margin.
- Your client gets a clear price sooner. A written elevator quote early in design helps them make budget decisions before framing.
- Inspections go smoother when the electrical, landing doors and shaft details are planned together.
What we need to see, and when
| Project stage | What to send or decide | Why it matters |
|---|---|---|
| Schematic design | Floor plans, number of stops, who will ride (including any wheelchair use) | Sets cab size, door layout and shaft location |
| Before permit drawings | Chosen elevator type, shaft size, pit and overhead details | Gets the right structure into the permit set |
| Before framing | Confirmed dimensions, door sides at each landing, header details | Shaft walls and openings framed once |
| Before rough electrical | Circuit, disconnect, lighting and phone/communication line locations | Avoids reopening walls |
| Before drywall | Shaft check for size and plumb | Catches problems while they are cheap to fix |
| Finish stage | Elevator installation, then inspection and handover | Keeps the elevator off your critical path at closeout |
For the homeowner’s side of this, our new construction elevator guide covers the same milestones in plain language you can share with clients.
Elevator-ready homes
Not every client wants to buy the elevator on day one. An elevator-ready plan lets them add it later with far less disruption:
- Stacked closets on each floor, framed to the future shaft dimensions
- Floor framing designed so openings can be cut later without major structural work
- A pit or slab detail at the lowest level, if the planned elevator type needs one
- A conduit or circuit run to the future machine location
- Ducts, plumbing and wiring kept out of the future shaft
It is a strong selling point for buyers planning to age in place or care for a parent. Our guide to home elevator types explains which drive systems need a pit, a machine room or neither.
Remodels and additions
Adding an elevator to an existing home is often part of a bigger remodel or addition. Common locations are stacked closets, a garage corner, space next to the stairs, or an exterior addition. If you are scoping a remodel with an elevator in it, we can look at the house with you before the design is final. See adding an elevator to an existing home.
When a full elevator isn’t the right fit, a vertical platform lift can handle a short rise at an entry, garage or split level.
Where we work
We are based in the Boise area and work across the Treasure Valley, including Boise, Meridian, Nampa, Eagle, Caldwell, Star, Kuna and Garden City, plus communities within about 250 miles of Boise. We also take on qualified projects in Idaho, Oregon, Washington, Utah, Montana, Wyoming, Nevada and Colorado. See areas we serve, and our local guides for Meridian and Eagle.
Frequently asked questions
When should a builder contact the elevator company?
During schematic design, before permit drawings. The elevator type and cab size set the shaft, pit and overhead dimensions that go into the plans.
Does a home elevator need a pit?
Many do, but not all. It depends on the drive type and model. Pneumatic and some through-floor units need no pit. Confirm before the foundation is designed.
Do residential elevators need a machine room?
Not always. Machine-room-less traction and several other drive types don’t. Hydraulic elevators need space for a pump nearby.
Are home elevators regulated by the State of Idaho?
Idaho’s elevator safety act exempts conveyances in private residences (Idaho Code § 39-8606), but local building and electrical permits still apply. Residential elevators are built to ASME A17.1, Section 5.3.
Can you price an elevator from plans?
Send the plans and we will talk through what we need to give your client a written quote.
Send us your next project
Whether it is a custom home in Eagle, a remodel in Boise or an elevator-ready plan for a client who isn’t ready yet, we’d like to see it early. Call (208) 329-5006 or send us the project details.